IMEI and NVRAM Repairing Tools - For MTK 65XX !

itxtutor

Editor in Chief
Staff member
May 15, 2015
60,104
471
113
#1
Hey guys, here are 3 common tools to repair your IMEI and NVRAM if yours is broken and mtk mobileuncle doesnt work :


All MTK Devices Baseband run On NVRAM - its located onAndroids Phones under the path "/dev/nvram"


There are 2 ways to recover NVRAM and IMEI






- One By Flashing BPLG Baseband (Modem) "MAUI_1XAMD_W1X_XX_SP_V1X" (Where X Is Some Number Depending On Device Specs)(Basic Functions Like Imei ,Etc Works With Most Alternative BPLG Files)


- Once NVRAM Is Corrupted You Must Use Flash Tool Solution With Correcting Scatter From ''__NODL_NVRAM'' To ''NVRAM'' And Select Correct Working Phone NVRAM File For Same Baseband.


So lets start with the first tool , its MAUI META 3G:


Downloads:


maui


cdc drivers


nvram baseband files


Here is also a video tutorial on how to use it :



Now lets check out tool #2 its IMEI & SN WRITER


Downloads :






IMEI SN WRITER


NVram basebands


video tutorial:






and last but not least , tool #3 SN WRITE STATION





SN Write tool


baseband


Usage :


All MTK Devices Baseband Run On NVRAM - Path In Androids Phones "/dev/nvram"


You Can Use 2 Ways To Reflash NVRAM.


- One By Flashing BPLG Baseband (Modem) "MAUI_1XAMD_W1X_XX_SP_V1X" (Where X Is Some Number Depending On Device Specs)(Basic Functions Like Imei ,Etc Works With Most Alternative BPLG Files)


- Once NVRAM Is Corrupted You Must Use Flash Tool Solution With Correcting Scatter From ''__NODL_NVRAM'' To ''NVRAM'' And Select Correct Working Phone NVRAM File For Same Baseband.


SN WRITE STATION Instructions:


1.Open SN Station IMEI Tool


Switch AT Mode and adjust PowerON Delay Time(s):5


2.After adjust the Delay Time(s) and change switch to Meta Mode


Select Write IMEI and Smart Phone


Put the cable to the Mobile and select the COM PORT(Look In Windows Device Manager For Device Modem COM Port)


Select the Dual IMEI


3.Then Select the Modem Database and select the BPLGU file


Select which database file need ( ex :- Mtk6575 6516 etc ...)


4.Select the Modem Database and select the APDB file


5.Then Click on START and enter IMEI (IMEI - s) Numbers You Want To Write


6.IMEI Is Repaired - Reboot Mobile Device
 

mrsim

KingOfNoobs
Staff member
Mar 1, 2014
16,207
2,366
113
47
London UK
#5
sounds like a driver issue...nothing you can do if you do not get that driver installed...plus your vol rockers do not work so you cannot trigger META MODE...by holding vol- or vol+ before connecting the device..:emoticon-0106-crying: