Eurostar onyx 1s mt6580 phone got stuck on boot logo

aliabdsy

New Member
Feb 11, 2020
3
0
1
32
Hello everyone, please help me. my phone is
Eurostar onyx 1s mt6582 android 6 phone got stuck on boot logo
I tried a lot of frameweres and it is not worked.
Someone suggest to wait for 15 minutes then try to wipe cache and format factory from recovery, it did not work.
I don't have custom recovery,
I can't unlock bootloader to install custom recovery.
I try (Root integrity check) from stock recovery, it gives 12 errors.
in recovery down their msg (supported API:3)

When I remove the battery from the phone and return it then I try to power the phone more than once. It works rarely. It reaches the setting stage and then gives an error message app.stop. then restart by self.

I tried a memory test using SP_Flash_Tool_v5.1944,

this not organal my firamwear , becouse i trided many frimwear
Code:
Welcome to use Miracle Box
(World's First Fuzzy Logic Based Tool)
Update:17-09-13
Connected OK.
Fuzzy Logic Method is very safe and reliable !
Please check the network.
Definition Applied
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port...
Set
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6580 SW:0000 Ver: CA00
Downloading Boot8 ...
EMMC Size: 0x039D000000
Flash Type: EMMC
INT/EXT RAM Size: 0x20000/0x40000000
Reading infr(EMMC)...
id:EUROSTAR_Onyx-1S_V3.0_22-09-2016
version:6.0
model:Onyx-1S
brand:EUROSTAR
manufacturer:EUROSTAR
PROINFO BaseAddr:0x80000 Size:0x300000
NVRAM BaseAddr:0x380000 Size:0x500000
PROTECT1 BaseAddr:0x880000 Size:0xA00000
PROTECT2 BaseAddr:0x1280000 Size:0xA00000
SECCFG BaseAddr:0x1C80000 Size:0x40000
LK BaseAddr:0x1CC0000 Size:0x60000
BOOT BaseAddr:0x1D20000 Size:0x1000000
RECOVERY BaseAddr:0x2D20000 Size:0x1000000
PARA BaseAddr:0x3D20000 Size:0x80000
LOGO BaseAddr:0x3DA0000 Size:0x800000
EXPDB BaseAddr:0x45A0000 Size:0xA00000
FRP BaseAddr:0x4FA0000 Size:0x100000
NVDATA BaseAddr:0x50A0000 Size:0x2000000
METADATA BaseAddr:0x70A0000 Size:0x2760000
OEMKEYSTORE BaseAddr:0x9800000 Size:0x200000
SECRO BaseAddr:0x9A00000 Size:0x600000
KEYSTORE BaseAddr:0xA000000 Size:0x800000
SYSTEM BaseAddr:0xA800000 Size:0xC0000000
CACHE BaseAddr:0xCA800000 Size:0x10000000
USERDATA BaseAddr:0xDA800000 Size:0x2C1780000
FLASHINFO BaseAddr:0x39BF80000 Size:0x1000000
>>Done.
CM2 to test EMMC
Code:
Operation : HW Test [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E43617264204344D7725983D9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E43617264204344D7725983D9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x000000039D000000
[eMMC] : FLASH_UCP : 14800 MiB [eMMC 16 GiB]
DEV RID : 0x4E7E88D5A9C7DB1F795F33908E537897
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


[Processing] FlashMemory Read-Write test
[eMMC] : [FORESEE] , draC , 0x39D000000 , 14800 MiB
[eMMC] : CID : 8801034E43617264204344D7725983D9

[eMMC] : MODE : SQ-WR
[PASSED] : eMMC RW Check #1 Ok!
[eMMC] : MODE : RA-WR
[PASSED] : eMMC RW Check #2 Ok!

[eMMC RO CHECK] : eMMC Ok! READ-WRITE Passed!

All Done!

Done!
Elapsed: 00:00:35
Reconnect Power/Cable!
Code:
============ Memory Detection Report ===========
Internal RAM:
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)
EMMC_PART_RPMB Size = 0x0000000000400000(4MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x000000039d000000(14800MB)
UFS:
ERROR: UFS was not detected!
============ RAM Test ============
Data Bus Test:
[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!

Address Bus Test:
[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
[A29]
OK!!
RAM Pattern Test :
Writing ...
0x44332211,

---------------------------
Smart Phone Flash Tool
---------------------------
ERROR : S_DA_MT_DEDICATED_PATTERN_ERROR (3099)

[H/W] DA detects error on the phone while memory test with dedicated pattern! Please ask for help.
[HINT]:

---------------------------
&OK &Help
---------------------------
 

Attachments

Last edited: