All Sp-Flashtool Error Codes

30

itxtutor

Editor in Chief
Staff member
May 15, 2015
60,079
1
113
Hey guys, here comes a list of all sp-flashtool errors and what they mean !


ERRORS:





(1003) S_COM_PORT_OPEN_FAIL


Indicates a problem with the ports.


May occur if for example you have disabled com ports in the BIOS (at least in this case, com-port is virtual and the physical USB, but if you disable you just do not see the device on which you need to install preloader driver).


it could also be a problem with the USB cable (it helps to change the cable).


or a problem with the USB-port on your computer. try another port. dont use ports on front panel !!!


(1011) S_NOT_ENOUCH_STORAGE_SPACE


Occurs when the size of any part of the firmware is larger than the allocated space .


It may help to change the flashtool. This error pops up on different versions too. But mostly its a wrong rom


(1013) S_COM_PORT_OPEN_FAIL


Similar to 1003 (com port error) Check out solutions for 1003, and if they dont work , try changing to flashtool v 5.1


(1022) S_UNSUPPORTED_VER_OF_DA


If this pops up, you need to switch to a newer SP-flashtool version


(1040) S_UNSUPPORTED_OPERATION


Usually this relates to a wrong scatter. You cant use a 6577 scatter for a 6575 phone !


(2005) S_BROM_CMD_STARTCMD_FAIL


When you flash preloader and you get this, be sure to connect the phone in META mode (press volume down while connecting and hold) Otherwise while flashing the preloader this error can pop up.


When selecting ReadBack, Format or MemoryTest and you get this. It is necessary to connect the phone mode BOOTROM.


(3001) S_DA_EXT_RAM_ERROR


Perhaps a problem with the connection. Check the cable and / or reconnect the cable to another port.


(3013) S_DS_SOC_CHECK_FAIL


Its possible that you got a wrong uboot. The uboot makes sure the operating system loader + drivers initialize the main equipment (display , CPU, GPIO )


Or when in the line of the path is the folder names such as : C: \ Users \ Username \ Desktop \ Firmware Phone \ MIUIV10 \ MIUIV10


(3144) S_DA_EMMC_FLASH_NOT_FOUND


Maybe wrong scatter. For example, in the name of the scatter you got emmc, and the phone is actually a MTD flash.


MTD : http://de.wikipedia.org/wiki/Memory_Technology_Device


EMMC http://www.datalight.com/solutions/technologies/emmc/what-is-emmc


(3066) S_DA_HANDSET_FAT_INFO_NOT_FOUND





Occurs when you are automatic formatting the phone, you should try to set the address of the regions you want to format manually.


S_DA_INVALID_RANGE (3036)


found this online :


The problem is that the SP Flash Tool before flashing PMT unit compares the address on the flash device with the scatter file and finds the difference, and why an error. PMT block is dynamically generated program SP Flash Tool from the scatter file. To delete / overwrite PMT block of a new scatter file, you must first delete it in the device that you want to flash. To do this, the program SP Flash Tool click on the "Format" (in the window that opens, change nothing, just press OK), then click "Download" and SP Flash Tool will write again to flash new data on the PMT block and other too.


(4001) S_FT_DA_NO_RESPONSE


Change USB-port and transfer SP Flash Tool in the root of your main harddrive ( C: )


Also there is maybe no info in the file download agenton the CPU / flash. Solution - upgrade.


The problem could also be hardware, such as broken flash memory.


(4008) S_FT_DOWNLOAD_FAIL


Change version of SP-flashtool ( older version does the job mostly !)


Change cable.


Battery Solution: charge the phone and try the flash process again.


(4009) S_FT_READBACK_FAIL


Either do not have space for a file or file can not be overwritten because it is locked.


try to make space on your phone and try external sd. Make sure permissions are ok.


(4032) S_FT_ENABLE_DRAM_FAIL


4032 an error occurred while trying to change the firmware and the firmware is not correct. You can try a different Sp-flashtool version (downgrade if you use v 5 ) or try a different rom or maybe format and flash again. only do this when you got the 100% correct rom.


(4050) S_FT_NEED_DOWNLOAD_ALL_FAIL


Do not match the size of the blocks in the PMT and scatter. To be found in the log line BROM_DLL

size changed from 0x

Often


Partition 13 (USRDATA) size changed from 0x0000000000000000 to 0x000000000B620000
To solve this USRDATA can be renamed to in __NODL_USRDATA ... but there may be an 8038 error due to the difference in names .


In general, this error is treated downloading all the blocks, then the size of a PMT should switch to the right.


(5002) S_INVALID_DA_FILE


When using SP_Flash_Tool download should be selected. Also a different Sp-flashtool version can fix it.


(5054) S_DL_GET_DRAM_SETTINGS_FAIL


Not really sure what causes it. Sometimes after a full format you cant install new firmware. Solved problem by removing entire drivers and clean reinstallation


(5066) S_DL_PC_BL_INVALID_GFH_FILE_INFOR


Wrong files. For example, when chosen scatter from folders not yet prepared for Flashtool files. It is necessary to choose the scatter of the folder prepared for FT files. You can prepare your files with MTK droid tools !!! (backup!)


(6124) S_SECURITY_INVALID_PROJECT, MSP ERROE CODE: 0x00


The problem was solved as follows: Options -> DA Download All -> Speed ​​-> Full Speed ​​(with select High Speed ​​on my computer appears this specific error)


and by the way the method has worked for error 1013


(8038) SP FLASH TOOL ERROR


Occurs if the names or addresses of the blocks in the scatter differ from the table inside the phone (PMT). We must look SP_FLASH_TOOL.log and seek in it a string NOT MATCH

NandLayoutParameter :: CompareIsNandLayoutMatched (): NOT MATCH: load item key (Example2), value (0x3444000), target item key (Example1), value (0x3444000)
in this example, it is necessary to replace the name of the scatter EXAMPLE2 on EXAMPLE. If a few differences, this error will occur until the scatter will not be identical to the PMT. You can just fix it, if we compare the tables that are in the log just above the line NOT MATCH. The first of the scatter, the second of the PMT number. It is necessary that all the names of the blocks in the scatter are the same as in the second table.





(8045) SP FLASH TOOL ERROR


The nature of the error is similar to 8038, but in practice editing a scatter file did not help. To solve this problem, many went to the service center and they fixed the device with an hardwareprogrammer.


Very few people fixed it by using DOWNLOAD button with all the other checkboxes.


(8200) SP FLASH TOOL ERROR


Occurs if you try to flash the device with firmware from another SoC Phone (eg you have mt6592, and you try to flash the firmware of the device on mt6582, etc.)


Also changing the flashtool version may help !


If you have solutions for other codes, please feel free to share them here !
 
Last edited by a moderator:
20

scrivz69

Well-Known Member
May 13, 2014
1,407
0
83
54
York UK
Brilliant mate.
 
30

itxtutor

Editor in Chief
Staff member
May 15, 2015
60,079
1
113
definitly, some errors even i didnt know. translated some from a russian lenovo forum. Crazy nerds over there
 
20

scrivz69

Well-Known Member
May 13, 2014
1,407
0
83
54
York UK
Lol some clever people about, thanks for posting it.
 
5

lex_19__00

Member
Oct 11, 2014
37
0
6
itxtutor  what about 


BROAM ERROR:S_STORAGE_NOT_MATCH(3167)


this is from the rom you told me to DL
 
30

itxtutor

Editor in Chief
Staff member
May 15, 2015
60,079
1
113
was your device UBIFS lex ?
 
1

Victor Pinho

New Member
Dec 12, 2014
2
0
1
Broam ERROR: S_STORAGE_NOT_MATCH (3167) ? Thank you.
 
30

mrsim

KingOfNoobs
Staff member
Mar 1, 2014
16,174
1
113
48
London UK
Broam ERROR: S_STORAGE_NOT_MATCH (3167) ? Thank you.
Victor...that is not much help...what device do you have...what are you trying to do with it....just quoting an error then it will be hard to help you out


please start a new thread in "hardware and software support" and give us your device model/name/specs also the problem you are having any links to roms you may have flashed etc etc...thank you...
 
1

dani311093

New Member
Dec 19, 2014
17
0
1
27
helllo itxtutor can u say whats meaning of Broom Error s chip ture not match(3168)?


tnx in advance 
 
30

mrsim

KingOfNoobs
Staff member
Mar 1, 2014
16,174
1
113
48
London UK
helllo itxtutor can u say whats meaning of Broom Error s chip ture not match(3168)?


tnx in advance 
dani311093,


can you please repeat that...'broom error s chip ture not match'....?


itxtutor is from austria and speaks german you can post in your own language if you are addressing him...
 
1

dani311093

New Member
Dec 19, 2014
17
0
1
27
dani311093,


can you please repeat that...'broom error s chip ture not match'....?


itxtutor is from austria and speaks german you can post in your own language if you are addressing him...
wurde lieber sagen in deutch sprache aber beim sp flash tools gibst nur auf englisch und chineschis
  So  Going to  Copy The text exactly how  is says :Brom error: S_chip_tyre_not_match(3168) vielen dank In voraus Mfg dani
 
30

mrsim

KingOfNoobs
Staff member
Mar 1, 2014
16,174
1
113
48
London UK
do you mean it says this


 


BROM ERROR : S_CHIP_TYPE_NOT_MATCH (3168)


[H/W] Target baseband chip is inconsistent with scatter files!


[HINT]:


Please select the correct scatter files for the target's baseband chip.
 
1

dani311093

New Member
Dec 19, 2014
17
0
1
27
do you mean it says this


 


BROM ERROR : S_CHIP_TYPE_NOT_MATCH (3168)


[H/W] Target baseband chip is inconsistent with scatter files!


[HINT]:


Please select the correct scatter files for the target's baseband chip.
thanks used the mtk droid tool so i could see something in the mobile it says its mt6589 but in droid it says its mt6582 gosh this mobiles are hard to understand thnks mrsim
 
30

itxtutor

Editor in Chief
Staff member
May 15, 2015
60,079
1
113
yes those phones are often not as advertised
 
1

dani311093

New Member
Dec 19, 2014
17
0
1
27
yes those phones are often not as advertised
i totaly agree first time im felling helples over something never had any problem with any mobile seems like chinese people really know how to give a people a headache  am out of ideas anymore cant even make a backup image using mtk droid getting error file adbd not install tho i tried almost every single thing seems its just going to end in the garbage
 
1

zio

New Member
Dec 23, 2014
2
0
1
33
thank you very good job!!!!!!!!
 
2

chimei

Member
Dec 8, 2014
230
0
18
58
i totaly agree first time im felling helples over something never had any problem with any mobile seems like chinese people really know how to give a people a headache  am out of ideas anymore cant even make a backup image using mtk droid getting error file adbd not install tho i tried almost every single thing seems its just going to end in the garbage
same here, I have unbricked many phones but with this clone mtk I feel completely out of depth shall never again by HDC product I mean HDC doesn't'  bother with customer support, not even website or address to contact them such waste of human resources on something worthless and useless ,nothing but pollution of environment if you ask me
 
Last edited by a moderator:
2

chimei

Member
Dec 8, 2014
230
0
18
58
Hey guys, here comes a list of all sp-flashtool errors and what they mean !


ERRORS:





(1003) S_COM_PORT_OPEN_FAIL


Indicates a problem with the ports.


May occur if for example you have disabled com ports in the BIOS (at least in this case, com-port is virtual and the physical USB, but if you disable you just do not see the device on which you need to install preloader driver).


it could also be a problem with the USB cable (it helps to change the cable).


or a problem with the USB-port on your computer. try another port. dont use ports on front panel !!!


(1011) S_NOT_ENOUCH_STORAGE_SPACE


Occurs when the size of any part of the firmware is larger than the allocated space .


It may help to change the flashtool. This error pops up on different versions too. But mostly its a wrong rom


(1013) S_COM_PORT_OPEN_FAIL


Similar to 1003 (com port error) Check out solutions for 1003, and if they dont work , try changing to flashtool v 5.1


(1022) S_UNSUPPORTED_VER_OF_DA


If this pops up, you need to switch to a newer SP-flashtool version


(1040) S_UNSUPPORTED_OPERATION


Usually this relates to a wrong scatter. You cant use a 6577 scatter for a 6575 phone !


(2005) S_BROM_CMD_STARTCMD_FAIL


When you flash preloader and you get this, be sure to connect the phone in  META mode (press volume down while connecting and hold) Otherwise while flashing the preloader this error can pop up.


When selecting ReadBack, Format or MemoryTest and you get this. It is necessary to connect the phone mode BOOTROM.


(3001) S_DA_EXT_RAM_ERROR


Perhaps a problem with the connection. Check the cable and / or reconnect the cable to another port.


(3013) S_DS_SOC_CHECK_FAIL


Its possible that you got a wrong uboot. The uboot makes sure the operating system loader + drivers initialize the main equipment (display , CPU, GPIO )


Or when in the line of the path is the folder names such as : C: \ Users \ Username \ Desktop \ Firmware Phone \ MIUIV10 \ MIUIV10


(3144) S_DA_EMMC_FLASH_NOT_FOUND


Maybe wrong scatter. For example, in the name of the scatter you got emmc, and the phone is actually a MTD flash.


MTD :  http://de.wikipedia.org/wiki/Memory_Technology_Device


EMMC  http://www.datalight.com/solutions/technologies/emmc/what-is-emmc


(3066) S_DA_HANDSET_FAT_INFO_NOT_FOUND





Occurs when you are automatic formatting the phone, you should try to set the address of the regions you want to format manually.


S_DA_INVALID_RANGE (3036)


found this online :


The problem is that the SP Flash Tool before flashing PMT unit compares the address on the flash device with the scatter file and finds the difference, and why an error. PMT block is dynamically generated program SP Flash Tool from the scatter file. To delete / overwrite PMT block of a new scatter file, you must first delete it in the device that you want to flash. To do this, the program SP Flash Tool click on the "Format" (in the window that opens, change nothing, just press OK), then click "Download" and SP Flash Tool will write again to flash new data on the PMT block and other too.


(4001) S_FT_DA_NO_RESPONSE


Change USB-port and transfer SP Flash Tool in the root of your main harddrive ( C: )


Also there is maybe no info in the file download agenton the CPU / flash. Solution - upgrade.


The problem could also be hardware, such as broken flash memory.


(4008) S_FT_DOWNLOAD_FAIL


Change version of SP-flashtool ( older version does the job mostly !)


Change cable.


Battery Solution: charge the phone and try the flash process again.


(4009) S_FT_READBACK_FAIL


Either do not have space for a file or file can not be overwritten because it is locked.


try to make space on your phone and try external sd. Make sure permissions are ok.


(4032) S_FT_ENABLE_DRAM_FAIL


4032 an error occurred while trying to change the firmware and the firmware is not correct. You can try a different Sp-flashtool version (downgrade if you use v 5 ) or try a different rom or maybe format and flash again. only do this when you got the 100% correct rom.


(4050) S_FT_NEED_DOWNLOAD_ALL_FAIL


Do not match the size of the blocks in the PMT and scatter. To be found in the log line BROM_DLL


To solve this USRDATA can be renamed to in __NODL_USRDATA ... but there may be an 8038 error due to the difference in names .


In general, this error is treated downloading all the blocks, then the size of a PMT should switch to the right.


(5002) S_INVALID_DA_FILE


When using SP_Flash_Tool download should be selected. Also a different Sp-flashtool version can fix it.


(5054) S_DL_GET_DRAM_SETTINGS_FAIL


Not really sure what causes it. Sometimes after a full format you cant install new firmware. Solved problem by removing entire drivers and clean reinstallation


(5066) S_DL_PC_BL_INVALID_GFH_FILE_INFOR


Wrong files. For example, when chosen scatter from folders not yet prepared for Flashtool files. It is necessary to choose the scatter of the folder prepared for FT files. You can prepare your files with MTK droid tools !!! (backup!)


(6124) S_SECURITY_INVALID_PROJECT, MSP ERROE CODE: 0x00


The problem was solved as follows: Options -> DA Download All -> Speed -> Full Speed (with select High Speed on my computer appears this specific error)


and by the way the method has worked for error 1013


(8038) SP FLASH TOOL ERROR


Occurs if the names or addresses of the blocks in the scatter differ from the table inside the phone (PMT). We must look SP_FLASH_TOOL.log and seek in it a string NOT MATCH


in this example, it is necessary to replace the name of the scatter EXAMPLE2 on EXAMPLE. If a few differences, this error will occur until the scatter will not be identical to the PMT. You can just fix it, if we compare the tables that are in the log just above the line NOT MATCH. The first of the scatter, the second of the PMT number. It is necessary that all the names of the blocks in the scatter are the same as in the second table.





(8045) SP FLASH TOOL ERROR


The nature of the error is similar to 8038, but in practice editing a scatter file did not help. To solve this problem, many went to the service center and they fixed the device with an hardwareprogrammer.


Very few people fixed it by using DOWNLOAD button with all the other checkboxes.


(8200) SP FLASH TOOL ERROR


Occurs if you try to flash the device with firmware from another SoC Phone (eg you have mt6592, and you try to flash the firmware of the device on mt6582, etc.)


Also changing the flashtool version may help !


If you have solutions for other codes, please feel free to share them here !
great and helpful list of errors,many people will be greatfull for it.thank you very much.
 
2

ihope

Member
Jul 6, 2014
254
0
18
Limousin, France
Thanks for taking the time to wright/find it as I'm sure most of us will need it in time.
 
2

Captain Slog

Member
Aug 23, 2014
65
0
8
What about this one:


PMT changed for the ROM; it must be downloaded.
 
Help Users

You haven't joined any rooms.

    You haven't joined any rooms.